Job Requirements:

• Minimum 3 years of shipyard experience with previous experience working on valves preferred.
• Test will be inspection of tool bag on walk in. Having the appropriate tools is critical. Candidates that do not bring the correct tools will be sent home!
• Must be able to pass a pre employment drug screen and background check.

Tool List:

• Must have large tool box. Cannot walk in with a bag of tools.
• drive socket set 12 point sizes from 3/8 to 1
• drive socket deep wheel set 12 point sizes from 3/8 to 1
• drive ratchets, drives sliding pull handle & drives flex pull handle
• drive extensions 2, 3, 6, 10 & 12 inches long
• drive universals
• drive adaptors from to 3/8 and to male & female
• 3/8 drive socket set 12 point sizes from 5/16 to 7/8
• 3/8 drive socket deep wheel set 12 point sizes from 5/16 to 7/8
• 3/8 drive ratchet, 3/8 drive sliding pull handle & 3/8 drive flex pull handle
• 3/8 drive extensions 2, 3, 6, 10 & 12 inches long
• 3/8 drive universals
• 3/8 drive adaptors from 3/8 to 1/2 and 3/8 to male & female
• drive socket set 12 point sizes from 5/64 to 3/8
• drive socket deep wheel set 12 point sizes from 5/64 to 3/8
• drive ratchet, drive sliding pull handle & 1/4 drive flex pull handle
• drive extensions 2, 3, 6, 10 & 12 inches long
• drive universals
• drive adaptors from 1/4 to 3/8 male & female
• Combination wrenches from 5/16 to 1
• Metric socket set & combination wrenches set from 10mm to 32mm
• Adjustable wrenches 6, 8, 12, & 15 inch lengths
• Pipe wrenches, 14, 18 & 24 inches lengths
• Ford Wrench 12, 18 inch long
• Snap ring pliers internal & external large & small pairs
• Needle nose pliers large & small
• Vise grips 8 and 10 inch sizes
• Chain wrenches 12 and 19 inch sizes
• Strap wrenches 12 and 18 inch
• Wire cutting pliers
• Channel Lock pliers 12 and 16 inch sizes
• Slip joint pliers large and small
• Screw drivers, Phillips head and straight large & small sets
• Offset screw drivers Phillips & straight
• Sheet metal shears
• Gasket cutter scissors
• Steel rulers 6, 12 inch sizes
• Tape measure 16-25 feet
• Center punch set Drift punch set and Chisel set
• Heel bar and alignment bar
• Flashlight & mirror
• Allen wrenches from 1/32 to 7/8 sizes
• -Allen sockets from 1/32 to one inch sizes
• Ball Peen hammers from 4oz, 6oz, 1 lbs, 2 lbs, & 3lbs sizes
• Rubber & rawhide hammers
• Knocker wrenches from 15/16 to 1 sizes
• Files set, Stone and air nozzle
• Feeler gauges short & long
• Paint scrapers
• Tool bag and 5lb, knocker hammer
• Packing removers and picks
• Toolbox large enough to hold all the above tools

You can also email or fax your resume. Reference Job #42475

Fax: 904-798-1720
Call: 904-357-5541 (HablamosEspaol)
EOE / DFW / F / Vet / Disabled Employer
HJ92316
Note: by applying for a position with Ameri-Force you are giving Ameri-Force permission to contact you via email, phone, and text messaging.